(Clock gear spoke program)
(By Bryan Mumford, Mumford Micro Systems)
(www.bmumford.com)
(Spoke width at rim: .1)
(Spoke diameter: 2.0)
(Spoke slope: 5 degrees)
(Cutter diameter: .125)
(Depth of cut: .25)
 
G20
G92.2
F10
 
G1 X.0937 Y.4994
G1 Z-.25
G1 X.0500 Y.9987
G2 X.9987 Y.0500 i-.0500 j-.9987
G1 X.4994 Y.0937
G2 X.0937 Y.4994 i.0389 j.4446
G1 Z0
 
G1 X.4994 Y-.0937
G1 Z-.25
G1 X.9987 Y-.0500
G2 X.0500 Y-.9987 i-.9987 j.0500
G1 X.0937 Y-.4994
G2 X.4994 Y-.0937 i.4446 j-.0389
G1 Z0
 
G1 X-.0937 Y-.4994
G1 Z-.25
G1 X-.0500 Y-.9987
G2 X-.9987 Y-.0500 i.0500 j.9987
G1 X-.4994 Y-.0937
G2 X-.0937 Y-.4994 i-.0389 j-.4446
G1 Z0
 
G1 X-.4994 Y.0937
G1 Z-.25
G1 X-.9987 Y.0500
G2 X-.0500 Y.9987 i.9987 j-.0500
G1 X-.0937 Y.4994
G2 X-.4994 Y.0937 i-.4446 j.0389
G1 Z0
 
X0 Y0
M2